-Thanks to its simple mounting and dismounting system, it takes just a few seconds to install it on your float tube. It mounts on a keel support base (not included) which must be bonded to the floor of the PVC float tube. -To maintain stability at full power, the motor is equipped with a detachable keel that can be easily installed on the bottom of the float tube. -Really easy to operate thanks to its handy remote control, allowing you to easily adjust its speed and direction (forward and reverse settings). -4-blade, 116 mm diameter propeller protected with a housing to protect against impacts with obstacles or cuts due to close proximity. -The motor has a power of 600 watts and a thrust of 28 pounds (14 Ah maximum consumption). - A 1.6 metre cable connects it to the battery and it is operated by remote control. - The 22.2 volt, 30 amp lithium-ion battery is housed in a waterproof box that also contains the remote control receiver. - It includes a “Man overboard” magnetic safety device. - It is suitable for use in freshwater and saltwater alike (IP68). (Following use in saltwater, it is recommended to rinse it thoroughly with freshwater). - DIMENSIONS: 18,8x25,8x11,7 cm (Motor), 20x30x10cm (Battery)