-Thanks to its simple mounting and dismounting system, it takes just a few seconds to install it on your float tube. It mounts on a keel support base (not included) which must be bonded to the floor of the PVC float tube. -To maintain stability at full power, the motor is equipped with a detachable keel that can be easily installed on the bottom of the float tube. -Really easy to operate thanks to its handy remote control, allowing you to easily adjust its speed and direction (forward and reverse settings). -4-blade, 116 mm diameter propeller protected with a housing to protect against impacts with obstacles or cuts due to close proximity. - Lightweight (1.6 kg), silent, emission free, and environmentally-friendly. - Simply use the quick connection cable to connect it to the battery (not included) and you’re ready to fish! - The motor has a power of 380 watts and a thrust of 18 pounds. (18 Ah maximum consumption). - In order to use the motor, you need to connect it to a 12 volt battery with at least 20 Amps (the greater the battery amperage the longer the motor will run). - Thanks to its composition and waterproof rating (IP68) it is suitable for use in freshwater and saltwater alike. (After use in saltwater it is advisable wash it thoroughly with fresh water) - DIMENSIONS: 18,8x25,8x11,7 cm